Mitsubishi Electric Q26UD(E)HCPU User Manual page 179

Item
*6
Internal relay [M]
*6
Latch relay [L]
*6
Link relay [B]
*6
Timer [T]
*6
Retentive timer [ST]
*6
Counter [C]
*6
Data register [D]
*6
Extended data register [D]
*6
Link register [W]
*6
Extended link register [W]
*6
Annunciator [F]
*6
Edge relay [V]
*6
Link special relay [SB]
*6
Link special register [SW]
Q03UDVCPU Q04UDVCPU
9216 points by
default 15360 points by default
(M0 to 9215) (M0 to 15359) (changeable)
(changeable)
8192 points by default (L0 to 8191) (changeable)
8192 points by default (B0 to 1FFF) (changeable)
2048 points by default (T0 to 2047) (changeable)
(Sharing of low- and high-speed timers)
The low- and high-speed timers are specified by the instructions.
The measurement unit of the low- and high-speed timers is set up by parameters.
(Low-speed timer: 1 to 1000ms, 1ms unit, 100ms by default)
(High-speed timer: 0.01 to 100ms, 0.01ms unit, 10.00ms by default)
0 points by default (sharing of the low- and high-speed retentive timers) (changeable)
The low- and high-speed retentive timers are specified by the instructions.
The measurement unit of the low- and high-speed retentive timers is set up by parameters.
(Low-speed retentive timer: 1 to 1000ms, 1ms unit, 100ms by default)
(High-speed retentive timer: 0.01 to 100ms, 0.01ms unit, 10.00ms by default)
Normal counter, 1024 points by default (C0 to 1023) (changeable)
13312 points
by default 22528 points by default
(D0 to 13311) (D0 to 22527) (changeable)
(changeable)
0 points by default (changeable)
8192 points by default (W0 to 1FFF) (changeable)
0 points by default (changeable)
2048 points by default (F0 to 2047) (changeable)
2048 points by default (V0 to 2047) (changeable)
2048 points by default (SB0 to 7FF) (changeable)
2048 points by default (SW0 to 7FF) (changeable)
CHAPTER 6 CPU MODULE
Universal model QCPU
Q06UDVCPU Q13UDVCPU
28672 points by default
(M0 to 28671) (changeable)
41984 points by default
(D0 to 41983) (changeable)
Q26UDVCPU
6
177