Mitsubishi Electric Q26UD(E)HCPU User Manual page 544

Number Name Meaning
Project data Project data
SD634 batch save batch save
error cause error cause
Project data Project data
SD635 batch save batch save
status status
542
Explanation
This register stores the cause of an error occurred when the
batch save function is executed.
• 0 : No error
H
• 100 : SD memory card not inserted
H
• 101 : Use of SD memory card stopped
H
• 200 : Save-target data size exceeded the capacity of
H
memory card
• 201 : Number of save files out-of-range
H
• 202 : Number of save folders out-of-range
H
• 300 : Write protection set to SD memory card
H
• 400 : SD memory card write error
H
• 401 : SD memory card removed
H
• 500 : Save-target data read error (program memory)
H
• 503 : Save-target data read error (standard RAM)
H
• 504 : Save-target data read error (standard ROM)
H
• 505 : Save-target data read error (SD memory card)
H
• 510 : Save-target data read error (system data)
H
• 600 : The batch save function was executed during the
H
latch data backup to the standard ROM.
• 601 : The batch save function was executed during online
H
change.
• 602 : The batch save function was executed with an FTP
H
client connected to and communicated with the CPU
module.
• 604 : The batch save function was executed while the CPU
H
module change function with SD memory card was being
executed.
• 607 : The batch save function was executed while the iQ
H
Sensor Solution function (data backup/restoration) was
being executed.
• 608 : The batch save function was executed while the file
H
transfer function (FTP client) was being executed.
• 701 : The batch save function was executed to the
H
program where "Execution Program Protection Setting"
was enabled with a block password.
This register stores the current status of the batch save
function.
• 0 : Not executed
H
• 1 : Being executed
H
• 2 : Completed
H
• FF : Error
H
Corresponding
Set by
ACPU
(When Set)
D9
S (Error) New
S (Status
New
change)
Corresponding
CPU
*5
LCPU
*5
LCPU