Mitsubishi Electric Q26UD(E)HCPU User Manual page 468

Number Name
SM410 0.1 second clock
SM411 0.2 second clock
SM412 1 second clock
SM413 2 second clock
SM414 2n second clock
SM415 2n (ms) clock
466
Meaning
• This relay repeatedly turns on and off
0.05s
at the specified interval.
0.05s
• This relay starts with off at power-on or
reset of the CPU module. (Note if the
0.1s
specified time has elapsed, on/off
0.1s
status will change even during program
execution.)
• This relay repeatedly turns on and off
0.5s
at the specified interval.
0.5s
• This relay starts with off at power-on or
reset of the CPU module. (Note if the
1s
specified time has elapsed, on/off
1s
status will change even during program
execution.)
• This relay repeatedly turns on and off
ns
at the interval specified in SD414 (unit:
ns
second). (If the value of SD414 is
changed, the time that has passed
after the previous ON/OFF interval of
SM414 is counted as the next interval,
and the ON/OFF status is changed at
the next interval that is newly
specified.)
Example: When the value of SD414 is
changed from 3 to 10.
3
seconds
SM414 OFF
SD414
• This relay starts with off at power-on or
reset of the CPU module. (Note if the
specified time has elapsed, on/off
status will change even during program
execution.)
• This relay repeatedly turns on and off
n ms
at the interval specified in SD415 (unit:
n ms
ms). (If the value of SD415 is changed,
the time that has passed after the
previous ON/OFF interval of SM415 is
counted as the next interval, and the
ON/OFF status is changed at the next
interval that is newly specified. SM415
operates in the same way as SM414.)
• This relay starts with off at power-on or
reset of the CPU module. (Note if the
specified time has elapsed, on/off
status will change even during program
execution.)
Explanation
The time that has passed after
the previous ON/OFF interval
of SM414 is counted as the
next interval.
10
ON
seconds
3 10
seconds seconds
3 10
Change of the value
Corresponding
Set by
ACPU
(When Set)
M9
M9030
S (Status
change)
M9031
M9032
S (Status
change)
M9033
S (Status M9034 format
change) change
S (Status
New
change)
Corresponding
CPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
Qn(H)
QnPH
QnPRH
QnU
LCPU