Mitsubishi Electric Q26UD(E)HCPU User Manual page 551

Number Name Meaning
Factor of
Restoration error
SD692
error factor occurred in
restoration
Current
Restoration
SD693 restoration
status
status
Restoration
Restoration
execution
SD694 execution
status display
status
(Percentage)
Specification Specification
of writing to of writing to
standard standard
SD695
ROM ROM
instruction instruction
count count
SD696 Available
Available
memory in
memory in
memory
SD697
memory card
card
Free memory
card space at
SD696
backup
Free
(lower bits)
memory
card space
Free memory
at backup
card space at
SD697
backup
(upper bits)
Backup data
SD698 size (lower
bits)
Backup data
capacity
Backup data
SD699 size (upper
bits)
*1 Modules whose serial number (first five digits) is "10102" or later (except the Q00UJCPU, Q00UCPU, and Q01UCPU)
*2 Universal model QCPU except the Q00UJCPU, Q00UCPU, and Q01UCPU
*3 Universal model QCPU except the Q00UJCPU
*4 On the Basic model QCPU, data is set at STOP to RUN or the RESET instruction execution after parameter execution.
*5 Modules whose serial number (first five digits) is "14042" or later
Explanation
Stores the cause of an error that occurred in restoration.
• 800 : The CPU module model name does not match.
H
• 801 : The backup data file does not match or reading of
H
backup data from the memory card or SD memory card was
not completed.
• 810 : Writing backup data to the restoration drive is not
H
completed.
• 811 : The standard RAM capacity for the restoration is
H
insufficient.
• 900 : A security key is set to the CPU module.
H
Stores the current restoration status.
• 0: Before restoration
• 1: Being executed
• 2: Completed
• FF: Restoration error (In automatic restoration, "0: Before
restoration" is stored at the completion of restoration.)
• This register stores the progress of restoration to the CPU
module in percentage (0 to 100%).
• "0" is stored at the start of restoration. In automatic
restoration, "0: Before restoration" is stored at the
completion of restoration.
• This register stores the maximum number of executions of
the writing to standard ROM instruction (SP.DEVST) per
day.
• When the number of executions of the writing to standard
ROM instruction exceeds the number of times set by
SD695, "OPERATION ERROR" (error code: 4113) occurs.
• The setting range of this register is 1 to 32767. If "0" or a
value outside the range has been set, "OPERATION
ERROR" (error code: 4113) occurs at execution of the
writing to standard ROM instruction.
This register stores a free space value in a memory card in
32-bit binary.
This register stores a free space value in a SD memory card if
the free space is insufficient for storing the backup data and
resulting in a backup error. (unit: byte) This register is cleared
to "0" when backup is completed.
This register stores backup data size in 32-bit binary.
APPENDICES
Corresponding
Set by Corresponding
ACPU
(When Set)
D9
S (Error) New
S (Status
New
change)
S (Status
New
change)
U New
S (Backup
QnU (except
in New
operation)
S (Backup
in New
operation)
S (Backup
in New
operation)
A
CPU
*1
QnU
LCPU
*1
QnU
LCPU
*1
QnU
LCPU
QnU
LCPU
*1
QnUDV)
QnUDV
LCPU
*1
QnU
LCPU
549