Mitsubishi Electric Q26UD(E)HCPU User Manual page 471

Number Name
OFF: Not being
SD memory card
SM607 forced disable
status flag ON: Being disabled by
OFF: Remove/insert
Memory card
SM609 remove/insert
ON: Remove/insert
enable flag
Drives 3 and 4 OFF: Unusable
SM620
usable flags ON: Usable
Drives 3 and 4 OFF: Not protected
SM621
protection flag ON: Protected
OFF: No drive 3
SM622 Drive 3 flag
ON: Drive 3 present
OFF: No drive 4
SM623 Drive 4 flag
ON: Drive 4 present
Drive 3/4 in-use OFF: Not used
SM624
flag ON: In use
Extended SRAM
OFF: Not inserted
SM626 cassette insertion
ON: Inserted
flag
Project data batch
OFF: Not completed
SM634 save completion
ON: Completed
flag
Project data batch
OFF: Not completed
SM636 load completion
ON: Completed
flag
ON: Batch delete
Directory batch
SM638
delete flag OFF: Batch delete not
OFF: File register not
SM640 File register use
ON: File register in
OFF: File register not
SM650 Comment use
ON: File register in
Meaning Explanation
• This relay turns on when an SD
disabled by the memory card is disabled by turning on
SD memory card SM606 (SD memory card forced
forced disable disable instruction).
instruction • This relay turns off when the forced
disable status of SD memory card is
the SD memory canceled by turning off SM606 (SD
card forced memory card forced disable
disable instruction instruction).
• This relay is turned on to enable the
insertion and removal of a memory
card.
prohibited
• Turned OFF by the system after the
memory card is removed.
enabled
• This relay can be used while both
SM604 and SM605 are off.
This relay is always on.
This relay is always off.
This relay is always on.
This relay is always on.
This relay is on while a file stored in the
drive 3 (standard RAM) or the drive 4
(standard ROM) is being used.
This relay is on while an extended SRAM
cassette is inserted.
This relay turns on upon completion of
the batch save processing.
This relay turns on upon completion of
the batch load processing.
This relay is on while the directory batch
being executed
delete processing is being executed, and
turns off when the processing ends.
executed
used This relay is on while a file register is
being used.
use
used This relay is on while a comment file is
being used.
use
Corresponding
Set by Corresponding
ACPU
(When Set)
M9
S (Status
New
change)
S/U New
S (Initial) New
S (Initial) New
Q00J/Q00/Q01
S (Initial) New
S (Initial) New
S (Status
New
change)
S (Status
New
change)
S (Status
New
change)
S (Status
New
change)
S (Writing) New
Q00J/Q00/Q01
S (Status
New
change)
S (Status
New
change)
APPENDICES
A
CPU
QnUDV
LCPU
Qn(H)
QnPH
QnPRH
*1
QnU
QCPU
LCPU
QCPU
LCPU
Qn(H)
QnPH
QnPRH
*2
QnU
LCPU
QCPU
LCPU
Qn(H)
QnPH
QnPRH
QnU
LCPU
QnUDV
*4
LCPU
*4
LCPU
QnUDV
Qn(H)
QnPH
QnPRH
*2
QnU
LCPU
Qn(H)
QnPH
QnPRH
QnU
LCPU
469