Mitsubishi Electric Q26UD(E)HCPU User Manual page 538

Number Name Meaning
Current Current scan
SD528
scan time time (ms value)
for low
speed
Current scan
execution
SD529
time (s value)
type
programs
Minimum Minimum scan
SD532
scan time time (ms value)
for low
speed
Minimum scan
execution
SD533
time (s value)
type
programs
Maximum Maximum scan
SD534
scan time
time (ms value)
for low
speed
Maximum scan
execution
SD535
time (s value)
type
programs
END
SD540 processing
END time (ms value)
processing
END
time
SD541 processing
time (s value)
END
SD540 processing
time (ms value)
END
processing
END
time
SD541 processing
time (s value)
Constant scan
SD542 wait time (ms
value)
Constant
scan wait
Constant scan
time
SD543 wait time (s
value)
Cumulative
execution time
for low speed
SD544
Cumulative
execution type
execution
programs (ms
time for low
value)
speed
Cumulative
execution
execution time
type
for low speed
programs
SD545
execution type
programs (s
value)
536
Explanation
This register stores the current scan time of a low-speed
execution type program. (The time is measured in
increments of 100s.)
• SD528: Stores a ms value (storage range: 0 to 65535)
• SD529: Stores a s value (storage range: 0 to 900)
A value in this register is cleared to "0" when the CPU
module is set to STOP.
This register stores the minimum scan time of a low-speed
execution type program. (The time is measured in
increments of 100s.)
• SD532: Stores a ms value (storage range: 0 to 65535)
• SD533: Stores a s value (storage range: 0 to 900)
A value in this register is cleared to "0" when the CPU
module is switched from STOP to RUN.
This register stores the maximum scan time excluding the
time taken to the first scan of a low-speed execution type
program. (The time is measured in increments of 100s.)
• SD534: Stores a ms value (storage range: 0 to 65535)
• SD535: Stores a s value (storage range: 0 to 900)
A value in this register is cleared to "0" when the CPU
module is switched from STOP to RUN.
Stores the time from the end of a scan program to the start of
the next scan. (The time is measured in increments of
100s.)
• SD540: Stores a ms value (storage range: 0 to 65535)
• SD541: Stores a s value (storage range: 0 to 900)
A value in this register is cleared to "0" when the CPU
module is switched from STOP to RUN.
Stores the time from the end of a scan execution type
program to the start of the next scan. (The time is measured
in increments of 100s.) (in increments of 1s for the
Universal model QCPU and LCPU).)
• SD540: Stores a ms value (storage range: 0 to 65535)
• SD541: Stores a s value (storage range: 0 to 900 (0 to
999 for the Universal model QCPU and LCPU)).
A value in this register is cleared to "0" when the CPU
module is switched from STOP to RUN.
This register stores wait time for constant scan. (The time is
measured in increments of 100s.) (in increments of 1s for
the Universal model QCPU and LCPU).)
• SD542: Stores a ms value (storage range: 0 to 65535)
• SD543: Stores a s value (storage range: 0 to 900 (0 to
999 for the Universal model QCPU and LCPU)).
A value in this register is cleared to "0" when the CPU
module is switched from STOP to RUN.
Stores the cumulative execution time of a low-speed
execution type program. (The time is measured in
increments of 100s.)
• SD544: Stores a ms value (storage range: 0 to 65535)
• SD545: Stores a s value (storage range: 0 to 900)
Cleared to 0 after the end of one scan of a low-speed
execution type program.
A value in this register is cleared to "0" when the CPU
module is switched from STOP to RUN.
Corresponding
Set by
ACPU
(When Set)
D9
S (Every
END New
processing)
S (Every
END New
processing)
S (Every
END New
processing)
S (Every
END New
processing)
S (Every
END New
processing)
S (Every
END New
processing)
S (Every
END New
processing)
Corresponding
CPU
Qn(H)
QnPH
Qn(H)
QnPH
Qn(H)
QnPH
Q00J/Q00/Q01
Qn(H)
QnPH
QnPRH
QnU
LCPU
QCPU
LCPU
Qn(H)
QnPH