Mitsubishi Electric Q26UD(E)HCPU User Manual page 488

(13)iQ Sensor Solution
Number Name
iQ Sensor
Solution
OFF  ON:Enabled
SM1435 backup/restoratio
n execution
enable
iQ Sensor
OFF  ON:Backup
SM1436 Solution backup
request
iQ Sensor OFF: Backup not
Solution backup
SM1437
normal ON: Backup normally
completion
OFF: Backup not
iQ Sensor
SM1438 Solution backup
ON: Backup completed
error completion
iQ Sensor
OFF  ON:Restoration
Solution
SM1439
restoration
request
iQ Sensor
OFF: Restoration not
Solution
SM1440 restoration
ON: Restored normally
normal
completion
OFF: Restoration not
iQ Sensor
Solution
SM1441 ON: Restoration
restoration error
completion
iQ Sensor
OFF  ON:
Solution
SM1442 backup/restoratio
n suspend
request
*1 Modules whose serial number (first five digits) is "17012" or later
*2 Built-in Ethernet port LCPU whose serial number (first five digits) is "14112" or later
486
Meaning
Backup/restoration is enabled when this
relay turns on.
(Enabled only when SD1446 = 3
(completed), 11
(suspend (error)), FF
• This relay turns off when
backup/restoration can be executed.
Backup is executed for the target model set
when this relay turns on. (Enabled only
when SD1446 = 1
request
• This relay turns off when the use
authority is reserved or when
backup/restoration can be executed.
This relay turns on when backup is
completed completed normally.
• This relay turns off when the use
completed authority is reserved.
This relay turns on when backup is
completed with an error.
completed • This relay turns off when the use
authority is reserved.
with an error The error code is stored into SD1452 or
SD1453.
Restoration is executed for the target
model set when this relay turns on.
(Enabled only when SD1446 = 1
request
preparation))
• This relay turns off when the use
authority is reserved.
This relay turns on when restoration is
completed completed normally.
• This relay turns off when the use
completed authority is reserved.
This relay turns on when restoration is
completed with an error.
completed
• This relay turns off when the use
authority is reserved.
completed with an
The error code is stored into SD1452 or
error
SD1453.
Backup/restoration is suspended when this
relay turns on. (Enabled only for
SD1446=2
H
Backup/Restoratio
• This relay turns off when the use
n suspend request
authority is reserved or when
backup/restoration can be executed.
Explanation
H
(suspend (no error)), FE
H H
(error)).
H
(in preparation))
H
(in
H
(execution))
Corresponding
Set by
ACPU
(When Set)
M9
S (Status
New
change)/U
S (Status
New
change)/U
S (Status
New
change)
S (Status
New
change)
S (Status
New
change)/U
S (Status
New
change)
S (Status
New
change)
S (Status
New
change)
Corresponding
CPU
*1
QnUDV
*2
LCPU
*1
QnUDV
*2
LCPU
*1
QnUDV
*2
LCPU
*1
QnUDV
*2
LCPU
*1
QnUDV
*2
LCPU
*1
QnUDV
*2
LCPU
*1
QnUDV
*2
LCPU
*1
QnUDV
*2
LCPU