Mitsubishi Electric Q26UD(E)HCPU User Manual page 649

Function
IP address change function (
(Communication via Built-in Ethernet Port))
Local device batch read function
CC-Link IE Field Network (
Network Master/Local Module User's Manual)
Send points expansion function (CC-Link IE Controller
*1*6
Network module)
Online change of inactive blocks (SFC) (
Q/L/QnA Programming Manual (SFC))
Expansion of SFC step relay points
Operation mode setting at SFC double block START
( MELSEC-Q/L/QnA Programming Manual (SFC))
SFC comment readout instruction (
*2
Programming Manual (SFC))
Data up to 10238 bytes can be exchanged with the
SP.SOCSND/S(P).SOCRCV(S)/S(P).SOCRDATA instructions
( QnUCPU User's Manual (Communication via Built-in
*2
Ethernet Port))
Parameter-valid drive information
Program cache memory auto recovery function
Extension of available index register range (Z0 to Z19) when
Jn and Un are used in the dedicated instruction
( Manuals for the network modules and the intelligent
function modules used)
Storage of device memory error information (Memory check
function) ( Page 555, Appendix 3 (9))
Storage of program error location (Memory check function)
( Page 507, Appendix 3 (1))
Serial communication function
(Q03UD/Q04UDH/Q06UDH/Q10UDH/Q13UDH/Q20UDH/
*1
Q26UDHCPU)
SFC control target block switching (
Programming Manual (SFC))
AnS/A series compatible extension base unit
Communication using the A-compatible 1E frame (MC
protocol) through built-in Ethernet port (
MELSEC Communication Protocol Reference Manual)
IP packet transfer function (for CC-Link IE Field Network)
( QnUCPU User's Manual (Communication via Built-in
*2*6
Ethernet Port))
Own station number setting function for CC-Link IE Field
Network ( MELSEC-Q CC-Link IE Field Network
Master/Local Module User's Manual)
QnUCPU User's Manual
*1
*1
MELSEC-Q CC-Link IE Field
MELSEC-
*2
*1*2
*2
MELSEC-Q/L/QnA
*1
*1
MELSEC-Q/L/QnA
MELSEC-Q/L
Function Serial number
version (first 5 digits)
"11082" or later
"12012" or later
"12052" or later
---
"12122" or later
B
"13022" or later
"13042" or later
"13062" or later
"13102" or later
"14022" or later
"14042" or later
APPENDICES
Programming tool version
GX Works2 GX Developer
--- ---
Version 1.31H or
×
later
Version 1.40S or
later
×
---
Version 1.40S or
×
later
--- ---
Version 1.62Q
×
or later
Version 1.73B or
×
later
--- ---
Version 1.77F or
×
later
Version 1.87R or
×
later
647
A