Mitsubishi Electric Q26UD(E)HCPU User Manual page 176

Item
Data transmission
speed
Communication mode
Transmission method
Specifications Max. distance between
of Ethernet hub and node
port built in the
Max.
*11
CPU module
number of
connectable
nodes
Number of
connections
Latch range
RUN/PAUSE contact
Clock function
Allowable momentary power failure time
5VDC internal current consumption
External dimensions
Weight
*11 For the Built-in Ethernet port QCPU
*12 The number is a total of TCP/IP and UDP/IP.
*13 The value is 0.49A for the Q20UDEHCPU and Q26UDEHCPU.
*14 For Q20UDEHCPU and Q26UDEHCPU, the external dimensions and the weight are as follows.
• External dimensions (D):115mm
• Weight: 0.22kg
*16 This is the number of connectable nodes when a repeater hub is used. For the number of connectable nodes when a
switching hub is used, contact the manufacturer of the switching hub used.
Remark
For the general specifications, refer to Page 117, CHAPTER 5.
174
Q20UDHCPU
Q20UDEHCPU
10BASE-
T
100BAS
E-TX
16 for a total of socket communication, MELSOFT connection, and MC protocol and 1 for FTP
*12
(Latch range can be set up for B, F, V, T, ST, C, D, and W.) (Setting by parameters)
One contact can be set up in X0 to 1FFF for each of RUN and PAUSE. (Setting by parameters)
H
W
D
Universal model QCPU
Q26UDHCPU
Q26UDEHCPU
100/10Mbps
Full-duplex/Half-duplex
Base band
100m
Cascade connection: Up to four bases
Cascade connection: Up to two bases
L0 to 8191 (8192 points by default)
Year, month, date, hour, minute, second, and day of the week
(Automatic leap year detection)
Accuracy: -2.96 to +3.74s (TYP.+1.42s)/d at 0°C
Accuracy: -3.18 to +3.74s (TYP.+1.50s)/d at 25°C
Accuracy: -13.20 to +2.12s (TYP.-3.54s)/d at 55°C
Varies depending on the power supply module.
*13
0.39A
98mm
27.4mm
*14
89.3mm
*14
0.20kg
Q50UDEHCPU Q100UDEHCPU
*16
*16
0.50A
115mm
0.24kg