Overview of Alarms
SINAMICS-Alarms
Cause:
CBE20: A PROFINET controller attempts to establish a connection using an incorrect configuring tele-
gram. The PROFINET version (V2.1/V2.2) of the project (HW Config) is not compatible with the
CBE20 firmware.
Remedy:
CBE20: Upgrade the PROFINET version of the project (HW Config) and/or the CBE20 firmware to
make them compatible.
See also: p8835 (CBE20 firmware selection)
2-994
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009