Siemens Sinumerik 840D sl Diagnostic Manual page 713

Hide thumbs Also See for Sinumerik 840D sl:

Table of Contents

The time slice clock cycle selected does not match any of the existing time slices.

See also: p4723 (Time slice cycle for trace)

Enter an existing time slice clock cycle. The existing time slices can be read out via p7901.

See also: r7901 (Time slice cycle times)

<location>Trace: Time slice clock cycle for endless trace not valid

Drive object:

Acknowledge:

The selected time slice clock cycle cannot be used for the endless trace

See also: p4723 (Time slice cycle for trace)

Enter the clock cycle of an existing time slice with a cycle time >= 2 ms for up to 4 recording channels

or >= 4 ms from 5 recording channels per trace.

The existing time slices can be read out via p7901.

See also: r7901 (Time slice cycle times)

<location>Trace: Time slice clock cycle for 2 x 8 recording channels not

Drive object:

Acknowledge:

The selected time slice clock cycle cannot be used for the setting p4702 = 1 (2 x 8 recording channels).

See also: p4723 (Time slice cycle for trace)

Enter the clock cycle of an existing time slice with a cycle time >= 4 ms or reduce the number of record-

ing channels to 4 per trace.

The existing time slices can be read out via p7901.

See also: r7901 (Time slice cycle times)

<location>Trace: Signal to be traced missing

Drive object:

Acknowledge:

- a signal to be traced was not specified.

- the specified signals are not valid.

Table of Contents