Siemens Sinumerik 840D sl Diagnostic Manual page 410

Overview of Alarms
NCK alarms
33: Time velocity changeover. Enter equal MDs.
34: Tolerance time SGE changeover. Enter equal MDs.
35: Delay time pulse deletion. Enter equal MDs.
36: Time for check of pulse suppression. Enter equal MDs.
37: Transition time STOP C to SBH. Enter equal MDs.
38: Transition time STOP D to SBH. Enter equal MDs.
39: Transition time STOP E to SBH. Enter equal MDs.
40: Stop reaction to SG. Enter equal MDs.
41: Stop reaction to SE. Enter equal MDs.
42: Creep speed pulse deletion. Enter equal MDs.
43: Memory test stop reaction.
44: Actual position value + limit value SG1.
45: Actual position value - limit value SG1.
46: Actual position value + limit value SG2.
47: Actual position value - limit value SG2.
48: Actual position value + limit value SG3.
49: Actual position value - limit value SG3.
50: Actual position value + limit value SG4.
51: Actual position value - limit value SG4.
52: Standstill position + tolerance.
53: Standstill position - tolerance.
54: Actual position value "+ nx" + tolerance.
55: Actual position value "+ nx".
56: Actual position value "- nx".
57: Actual position value "- nx" + tolerance.
58: Current stop request.
59: SG override factor 1. Enter equal MDs.
60: SG override factor 2. Enter equal MDs.
61: SG override factor 3. Enter equal MDs.
62: SG override factor 4. Enter equal MDs.
63: SG override factor 5. Enter equal MDs.
64: SG override factor 6. Enter equal MDs.
65: SG override factor 7. Enter equal MDs.
66: SG override factor 8. Enter equal MDs.
67: SG override factor 9. Enter equal MDs.
68: SG override factor 10. Enter equal MDs.
69: SG override factor 11. Enter equal MDs.
70: SG override factor 12. Enter equal MDs.
71: SG override factor 13. Enter equal MDs.
72: SG override factor 14. Enter equal MDs.
73: SG override factor 15. Enter equal MDs.
74: SG override factor 16. Enter equal MDs.
75: Velocity limit "nx". Enter equal MDs.
76: Stop reaction with SG1. Enter equal MDs.
77: Stop reaction with SG2. Enter equal MDs.
78: Stop reaction with SG3. Enter equal MDs.
79: Stop reaction with SG4. Enter equal MDs.
80: Modulo value for safe cams. Enter equal MDs.
81: Velocity tolerance for safe braking ramp. Enter equal MDs.
82: SG correction factor SGEs. Actuate equal SGEs.
83: Acceptance test duration. Enter equal MDs.
84: Stop F -> Stop B delay time. Enter equal MDs.
85: Bus failure pulse suppression delay time. Enter equal MDs.
86: Match MD36914 $MA_SAFE_SINGLE_ENC and drive parameter p9526
87: Match MD36912 $MA_SAFE_ENC_INPUT_NR and p9526
88: Match MD36903 $MA_SAFE_CAM_ENABLE and drive parameter p9503
89: Encoder limit frequency. Enter equal MDs.
90: Check cam positions, MD36940 $MA_SAFE_CAM_TOL
91: Safe cam 5+ (+ tolerance). Enter equal MDs.
92: Safe cam 5+. Enter equal MDs.
93: Safe cam 5- (+ tolerance). Enter equal MDs.
94: Safe cam 5-. Enter equal MDs.
95: Safe cam 6+ (+ tolerance). Enter equal MDs.
96: Safe cam 6+. Enter equal MDs.
2-410
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG, 2009. All Rights Reserved
03/2009