Siemens Sinumerik 840D sl Diagnostic Manual page 566

Overview of Alarms
HMI-Alarms
100550 Error TA: Syntax error in %1 in line %2
Parameters: %1 = --
%2 = --
Definitions: --
Remedy: --
100555 Error TA: Branch point not found in %1
Parameters: %1 = --
Definitions: --
Remedy: --
100560 Automatic test machine started
Definitions: --
Remedy: --
100565 Automatic test machine stopped
Definitions: --
Remedy: --
100570 Error TA: %1 not found
Parameters: %1 = --
Definitions: --
Remedy: --
100600 Error on trying to read text file %1
Parameters: %1 = --
Definitions: --
Remedy: --
100620 Error on trying to open font file %1
Parameters: %1 = --
Definitions: --
Remedy: --
100648 The selected language was not installed without error
Definitions: --
Remedy: --
100649 MMC0_TXV.INI file not found
Definitions: --
Remedy: --
100650 No NC/PLC found! NC/PLC being simulated!
Definitions: --
Remedy: --
100651 Network driver error!
Definitions: --
Remedy: --
100652 Network driver error! (network connection correct?)
Definitions: --
Remedy: --
100653 Network driver error! (DHCP/IP address correct?)
Definitions: --
Remedy: --
100850 Note : PCU 20 memory limit exceeded
Definitions: --
2-566
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009