Siemens Sinumerik 840D sl Diagnostic Manual page 622

Overview of Alarms
HMI-Alarms
Remedy: Connect to the NCU and restart the PCU if required.
129908 %1: Unable to determine active channels.
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: The active channels of the specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129909 %1: Unable to determine the name of channel %2.
Parameters: %1 = Name of the NCU according to NETNAMES.INI
%2 = Channel number
Definitions: The channel name of the specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129910 %1: Unable to determine general machine data.
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: The general machine data of the specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129911 %1: Unable to determine machine data
$MN_MM_PROTOC_NUM_FILES[1,10].
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: Machine data MN_MM_PROTOC_NUM_FILES[1,10] of the specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129912 %1: Unable to determine machine data
$MN_MM_PROTOC_NUM_ETPD_STD_LIST[1,10].
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: Machine data LINKITEM_MN_MM_PROTOC_NUM_ETPD_STD_LIST[1,10] of the specified NCU
could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129913 %1: Unable to determine machine data
$MN_MM_PROTOC_NUM_ETPD_OEM_LIST[1,10].
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: Machine data LINKITEM_MN_MM_PROTOC_NUM_ETPD_OEM_LIST[1,10] of the specified NCU
could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129914 %1: Unable to determine channel-specific machine data.
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: The channel-specific machine data of the specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129915 %1: Unable to determine active user for channel %2.
Parameters: %1 = Name of the NCU according to NETNAMES.INI
%2 = Channel number
Definitions: The "active user" of the specified channel of the specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129930 %1: Min. %2 log files are required for the requested time determination
($MN_MM_PROTOC_NUM_FILES[%3])
Parameters: %1 = Name of the NCU according to NETNAMES.INI
%2 = Number of log files required
%3 = User index
Definitions: Time measuring of the configured workpiece requires at least the specified number of log files.
Remedy: Set general machine data $MN_MM_PROTOC_NUM_FILES[%3] of NCU %1 to value %2.
2-622
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009