Siemens Sinumerik 840D sl Diagnostic Manual page 437

03/2009
Reaction: Mode group not ready.
Channel not ready.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Correct the MD.
Program Con- Switch control OFF - ON.
tinuation:
27204 PROFIsafe: double assignment MD %1[%2] - MD %3[%4]
Parameters: %1 = MD name 1
%2 = MD array index for MD name 1
%3 = MD name 2
%4 = MD array index for MD name 2
Definitions: A double assignment has illegally been parameterized in the specified machine data:
$A_INSE parameterized on DMP as well as PROFIsafe modules. Involved MDs:
- MD $MN_SAFE_IN_HW_ASSIGN
- MD $MN_PROFISAFE_IN_ASSIGN
$A_INSE parameterized on several PROFIsafe modules. Involved MD:
- MD $MN_PROFISAFE_IN_ASSIGN
Reaction: Mode group not ready.
Channel not ready.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Correct the MD.
Program Con- Switch control OFF - ON.
tinuation:
27205 PROFIsafe: number of signals in MD %1 [%2] <> MD %3[%4]
Parameters: %1 = MD name 1
%2 = MD array index for MD name 1
%3 = MD name 2
%4 = MD array index for MD name 2
Definitions: The parameterized number or the signals used must be the same in both machine data.
Reaction: Mode group not ready.
Channel not ready.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Correct the MD.
Program Con- Switch control OFF - ON.
tinuation:
27206 PROFIsafe: MD %1[%2] maximum number of F user data (%3 bits)
exceeded.
Parameters: %1 = MD name
%2 = MD array index for MD name
%3 = Maximum F user data bits.
Definitions: The parameterized data indicated in the machine data are outside the F user data range of the F mod-
ule.
Note
When machine data PROFISAFE_IN/OUT_ADDRESS is displayed, the sub slot address
parameterized in it will exceed the F user data range of the F module.
© Siemens AG, 2009. All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
Overview of Alarms
NCK alarms
2-437