Siemens Sinumerik 840D sl Diagnostic Manual page 408

Overview of Alarms
NCK alarms
- 184 Cam position MD36936 $MA_SAFE_CAM_POS_PLUS[27].
- 185 Cam position MD36937 $MA_SAFE_CAM_POS_MINUS[27] + MD36940
$MA_SAFE_CAM_TOL.
- 186 Cam position MD36937 $MA_SAFE_CAM_POS_MINUS[27].
- 187 Cam position MD36936 $MA_SAFE_CAM_POS_PLUS[28] + MD36940
$MA_SAFE_CAM_TOL.
- 188 Cam position MD36936 $MA_SAFE_CAM_POS_PLUS[28].
- 189 Cam position MD36937 $MA_SAFE_CAM_POS_MINUS[28] + MD36940
$MA_SAFE_CAM_TOL.
- 190 Cam position MD36937 $MA_SAFE_CAM_POS_MINUS[28].
- 191 Cam position MD36936 $MA_SAFE_CAM_POS_PLUS[29] + MD36940
$MA_SAFE_CAM_TOL.
- 192 Cam position MD36936 $MA_SAFE_CAM_POS_PLUS[29].
- 193 Cam position MD36937 $MA_SAFE_CAM_POS_MINUS[29] + MD36940
$MA_SAFE_CAM_TOL.
- 194 Cam position MD36937 $MA_SAFE_CAM_POS_MINUS[29].
- 195 Cam track assignment SN1 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[0].
- 196 Cam track assignment SN2 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[1].
- 197 Cam track assignment SN3 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[2].
- 198 Cam track assignment SN4 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[3].
- 199 Cam track assignment SN5 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[4].
- 200 Cam track assignment SN6 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[5].
- 201 Cam track assignment SN7 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[6].
- 202 Cam track assignment SN8 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[7].
- 203 Cam track assignment SN9 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[8].
- 204 Cam track assignment SN10 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[9].
- 205 Cam track assignment SN11 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[10].
- 206 Cam track assignment SN12 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[11].
- 207 Cam track assignment SN13 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[12].
- 208 Cam track assignment SN14 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[13].
- 209 Cam track assignment SN15 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[14].
- 210 Cam track assignment SN16 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[15].
- 211 Cam track assignment SN17 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[16].
- 212 Cam track assignment SN18 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[17].
- 213 Cam track assignment SN19 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[18].
- 214 Cam track assignment SN20 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[19].
- 215 Cam track assignment SN21 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[20].
- 216 Cam track assignment SN22 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[21].
- 217 Cam track assignment SN23 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[22].
- 218 Cam track assignment SN24 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[23].
- 219 Cam track assignment SN25 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[24].
- 220 Cam track assignment SN26 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[25].
- 221 Cam track assignment SN27 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[26].
- 222 Cam track assignment SN28 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[27].
- 223 Cam track assignment SN29 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[28].
- 224 Cam track assignment SN30 MD36938 $MA_SAFE_CAM_TRACK_ASSIGN[29].
- 225 Result list 3: Differences in the results for "Safe cam track" for cams SN1..6.
- 226 Result list 4: Differences in the results for "Safe cam track" for cams SN7..12.
- 227 Result list 5: Differences in the results for "Safe cam track" for cams SN13..18.
- 228 Result list 6: Differences in the results for "Safe cam track" for cams SN19..24.
- 229 Result list 7: Differences in the results for "Safe cam track" for cams SN25.. 30.
- 1000 Control timer expired: If one channel informs another of an SGE change, this control timer is
used to check whether the update timer in the other channel has expired.
- 1001 (only assigned on drive, see alarm F01711)
- 1002 User confirmation inconsistent: Data for user confirmation different in both monitoring channels
after 2 seconds.
%3 = state of the NCK user acknowledgement.
%4 = state of the 611D user acknowledgement.
- 1003 Reference tolerance MD36944 $MA_SAFE_REFP_POS_TOL exceeded.
- 1004 Plausibility error in user confirmation.
- 1005 Pulses already disabled on test stop selection.
- 1007 (only assigned on drive, see alarm F01711).
- 1008 (only assigned on drive, see alarm F01711).
- 1009 Pulses not disabled after MD36957 $MA_SAFE_PULSE_DIS_CHECK_TIME test stop time.
2-408
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG, 2009. All Rights Reserved
03/2009