Siemens Sinumerik 840D sl Diagnostic Manual page 594

Overview of Alarms
HMI-Alarms
105030 Please wait, renumbering in progress (%1)!
Parameters: %1 = --
Definitions: The part program's blocks are serially numbered.
Remedy: --
105031 Renumbering has been aborted !
Definitions: Renumbering of the part program was aborted.
Insufficient part program memory may be the cause of the error.
Remedy: --
105032 Renumbering finished !
Definitions: Renumbering of the part program was completed without errors.
Remedy: --
105033 Renumbering incomplete, max. block length exceeded (%1)
Parameters: %1 = --
Definitions: --
Remedy: --
105041 Block number will be too large !
Definitions: The set increment and the size of the program cause the block number to be greater than 999999.
Remedy: --
105042 Block number not allowed !
Definitions: The first block number is less than 0 or greater than 999999.
Remedy: --
105043 Increment not allowed !
Definitions: The increment was entered as a negative.
Remedy: --
105050 Please wait: graphics being output !
Definitions: The help displays are being prepared for display.
Remedy: --
105051 %1
Parameters: %1 = --
Definitions: The dynamic long texts for the cycle parameterization are output here.
Remedy: --
105052 Error in description of cycles of %1 !
Parameters: %1 = --
Definitions: The cycle description sc.com, uc.com contains a line that cannot be interpreted.
This line is output via <xxx>.
Remedy: --
105053 No cycle available in current line !
Definitions: The editor's cursor is in a line that does not contain a cycle.
A recompilation is not possible.
Remedy: --
105054 Error on calling of description of cycles !
Definitions: One of the sc.com, cov.com cycle description files contains a non-interpretable parameter.
Initilization of the cycles is aborted.
Remedy: --
105060 Please wait: initialization of cycles support
Definitions: The cycle description files are interpreted and prepared for display on the screen.
Remedy: --
2-594
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009