Siemens Sinumerik 840D sl Diagnostic Manual page 584

Overview of Alarms
HMI-Alarms
104017 No settable frame currently active
Definitions: --
Remedy: --
104018 Tool not available
Definitions: The specified tool does not exist.
Remedy: --
104019 Tool type not available
Definitions: The specified tool type does not exist.
Remedy: Specify a valid tool type.
104020 No empty location found
Definitions: There is no empty location with the specified search parameters.
Remedy: Correct search parameters.
104021 Error on searching for empty location
Definitions: --
Remedy: --
104022 Error in present location search
Definitions: --
Remedy: --
104023 Error in Tool Load
Definitions: An error occurred while a tool was being loaded; the procedure has been aborted.
Remedy: Check loader.
104024 Error in Tool Unload
Definitions: An error occurred while a tool was being unloaded; the procedure has been aborted.
Remedy: Check unloader.
104025 No magazine configured
Definitions: No magazine was configured.
Remedy: Configure a magazine via the machine data.
104026 NOTICE! Tool Load running!
Definitions: Note regarding loading process.
Remedy: Wait until the loading procedure is terminated.
104027 NOTICE! Tool Unload running!
Definitions: Note regarding unloading process.
Remedy: Wait until the unloading procedure is terminated.
104028 Error on accessing general tool data
Definitions: --
Remedy: --
104029 You cannot load into this location
Definitions: The location may already be occupied.
Remedy: Select another loading location.
104030 No more data found
Definitions: All existing data was already displayed.
Remedy: --
104031 There is no preselected tool
Definitions: --
Remedy: --
2-584
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009