Siemens Sinumerik 840D sl Diagnostic Manual page 520
Hide thumbs
Also See for Sinumerik 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Overview of Alarms
NCK alarms
61700
[Channel %1: ] Block %2: Name of program to be generated is missing
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycle: CYCLE952
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Check parameter PRG
Program Con-
Clear alarm with the RESET key. Restart part program
tinuation:
61701
[Channel %1: ] Block %2: Contour %4 does not exist
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycle: CYCLE952
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Check parameter CON
- Check contour call
- Check whether the contours exist in the program storage (workpieces, subroutines or part programs)
Program Con-
Clear alarm with the RESET key. Restart part program
tinuation:
61702
[Channel %1: ] Block %2: Label %4 not existing in machined part contour
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycle: CYCLE952
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Check whether the labels exist in the machined part contour
Program Con-
Clear alarm with the RESET key. Restart part program
tinuation:
61703
[Channel %1: ] Block %2: Label %4 not existing in the blank contour
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycle: CYCLE952
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Check whether the labels exist in the blank contour
Program Con-
Clear alarm with the RESET key. Restart part program
tinuation:
61704
[Channel %1: ] Block %2: Machined part contour missing
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycle: CYCLE952
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Check contour call
2-520
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG, 2009. All Rights Reserved
03/2009
Hide quick links:
Advertisement
Table of Contents
