Figure 4-18 Secure Stand Mount To Floor With Screws - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
3. Using supplied screws, secure the CHS2U STAND KIT to the
floor (refer to Figure 4-18 Secure Stand Mount to Floor with
Screws on page
To prevent possible damage to the 19"
chassis due to falling, NEC recommends
screws be installed in the stand mount
brackets as soon as possible.

Figure 4-18 Secure Stand Mount to Floor with Screws

4. Connect the ground wire to all chassis. Refer to
Chassis Grounding on page 4-34
grounding the system.
5. Refer to 3.5 Installing the 19" Chassis on page 4-24
installation of the chassis or, Chapter 5 paragraph
an Extension or Trunk Blade on page 6-3
blades.
4-19).
for complete details on
Issue No. 1.5
3.5.5 Install 19"
to continue
2.2 Installing
for installation of
4 - 19