Adjusting The Height On The Multiline Terminal; Figure 7-36 Adjust Height Of Dt300/Dt700 Series Terminal; Table 7-11 Line Key Kit Type - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
4.8
7 - 36
8. Press the Up/Down key to select the line key kit being used.
By default, the correct line key kit for the keypad kit selected above is
highlighted.
Line Key Kit Entry
Kit12
Kit24
Kit32
Kit8
Kit6
Kit2
Kit0
9. Press Softkey 4 for OK to complete.
10. Continue pressing Softkey 4 to exit (Exit-Exit-Save). The
terminal resets automatically.

Adjusting the Height on the Multiline Terminal

The height of the DT300/DT700 Series multiline terminals can be adjusted by
moving the legs attached to the bottom of the terminal.
1. Turn telephone over (button side down).
2. Adjust legs to desired height (refer to
DT700 Series Terminal on page

Figure 7-36 Adjust Height of DT300/DT700 Series Terminal

3. Turn telephone over (button side up).
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Table 7-11 Line Key Kit Type

Description
Enhanced 12-Button
Enhanced 24-Button
Enhanced 32-Button
DESI-Less
Value 6-Button
Value 2-Button
IP-CTS
Figure 7-36 Adjust Height of DT300/
7-36).
UNIVERGE SV8100/SV8300