Issue No. 1.5
10 - 22
5.
Install bridging clips as required.
6.
Plug a modular line cord from the mod jack to the CN1 connector on the
PGD(2)-U( ) ADP.
7.
Connect an RCA jack to the audio output(s) on the back of the
PGD(2)-U( ) ADP.
8.
The opposite end of this cable is connected to the external music source
either directly or by connecting to the cross-connect block where the
music source is connected.
UNIVERGE SV8100/SV8300
Figure 10-16 CPRU Connections
Installing SV8100/SV8300 Optional Equipment