Issue No. 1.5
7 - 34
4.
Insert the DESI printer sheet and plastic panels on the multiline
terminal. Refer to
4.7.2
Configuring the Digital Telephone for the Numbered Keypad
1.
With the telephone not plugged in and the handset on-hook,
press the 4 and 6 buttons on the numbered keypad and connect
the telephone cable.
2.
Press 2 on the numbered keypad to enter the Button Kit mode.
3.
Follow the directions below for the type of keypad installed:
Numbered Keypad Type
Japanese
Model A Telephone
Model B UX5000 Telephone
Call Center
Hotel-1
Hotel-2
Retirement Home
Japan 32-Button
Japan Value
Model A Value
Model B Value
Reserve
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 7-35 Install Plastic
Line Key
Panel
Numbered
Keypad
Panel
Figure 7-35 Install Plastic Panels
This places the telephone into Service Class Read/Write (R/W) mode. The
Message Waiting LED should be lit.
The Message Waiting LED should flash.
Table 7-9 Numbered Keypad Type
Push
01
02
03
04
05
06
07
08
09
10
11
12
UNIVERGE SV8100/SV8300
Panels.
Desi Printer
LED Indication
Line 1 LED on Red
Line 2 LED on Red
Line 1 and 2 LED on Red
Line 1 LED on Green
Line 2 LED on Green
Line 1 and 2 LED on Green
Line 1 LED flashing Red
Line 2 LED flashing Red
Line 1 and 2 LED flashing Red
Line 1 LED flashing Green
Line 2 LED flashing Green
Line 1 and 2 LED flashing Green
Sheet