Wall Mounting A Multiline Terminal Using The Base Plate; Adjusting The Hanger Hook; Wall Mounting The Multiline Terminal; Figure 11-28 Removing The Hanger Hook On A Multiline Terminal - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
11.1
System Hardware Manual

Wall Mounting a Multiline Terminal using the Base Plate

11.1.1

Adjusting the Hanger Hook

1. Remove the hook from the unit.

Figure 11-28 Removing the Hanger Hook on a Multiline Terminal

2. Turn the hook with the tab toward the top.
3. Slide the hook until it glides into position forming the hanger
hook for the handset.
11.1.2

Wall Mounting the Multiline Terminal

1. Extend and remove the base cover from the multiline terminal.
Refer to
Multiline
Hanger Hook

Figure 11-29 Sliding the Hanger Hook into Position

Section 10 Removing or Installing the Base Plate on a
Terminal.
Issue No. 1.5
11 - 17