Chapter 8 Installing Sv8100/Sv8300 Bluetooth; Bluetooth Cordless Handset; Bluetooth Cordless Handset (Bch) Interface; Table 8-1 Bch Charging Leds - NEC UNIVERGE SV8100 System Hardware Manual

Installing SV8100/SV8300 Bluetooth
G
S 1
ENERAL
ECTION
This chapter provides information regarding the bluetooth telephone and
adapter that can be used with the UNIVERGE SV8100/SV8300 system.
B
S 2
LUETOOTH
ECTION
2.1
On-Hook Charging:
Off-Hook (Idle):
System Hardware Manual
D
ESCRIPTION
C
ORDLESS

Bluetooth Cordless Handset (BCH) Interface

This optional interface allows the multiline terminal user to use
Bluetooth technology to provide a cordless handset. This handset
provides:
Keyset-like Handset
Eight Line Buttons
Function Button
Dial Button
Display
All Multiline Terminal Functions with Main Unit
Cradle Charges Handset
Base Side RF Block (50 meters, Class 1)
Bluetooth Distance: 50 Meters
Up to 16 devices can be installed within a 100m (open area, ex:
outdoors) or 50m (confined/blocked area, ex: indoors) radius and
each device is located with 1 meter between each device
simultaneously. This maximum can be affected by the installation
environment.
The BCH and a Bluetooth headset (BTH) cannot be used at the
same time. When using a Bluetooth headset in place of the
handset, the Plantronics Voyager 510 headset is recommended.
When charging the BCH, the following LEDs provide indications of
the status:

Table 8-1 BCH Charging LEDs

Red = Charging
No LED = Idle
H
ANDSET
Green = Charging Complete
Flashing Red = Incoming Call
8
8 - 1