Led Indications; Connectors; Table 6-41 Cd-4Odta Led Indications; Table 6-42 Cd-4Odta Rj-61 Cable Connector Pin-Outs - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (80ms
On/Off) x 3/
400ms Off
System Hardware Manual
5.7.3

LED Indications

LED indications for the CD-4ODTA are listed in
LED Indications. Each LED is listed with its associated function and
LED and Operational status. Refer to
on page 6-83

Table 6-41 CD-4ODTA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
5.7.4

Connectors

Table 6-42 CD-4ODTA RJ-61 Cable Connector Pin-Outs on page 6-86
shows the pin-outs for the RJ-61 connector.
Blade on page 6-83
blade.
for the location of the LEDs on the blade.
shows the location of the connectors on the ODT
Issue No. 1.5
Table 6-41 CD-4ODTA
Figure 6-29 CD-4ODTA Blade
Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
Figure 6-29 CD-4ODTA
6 - 85