Issue No. 1.5
4 - 14
3.
Using anchor bolts, secure the CHS BASE UNIT to the floor.
Refer to
Figure 4-11 Secure CHS BASE UNIT with Anchor Bolts
on page 4-14
for screw location..
Figure 4-11 Secure CHS BASE UNIT with Anchor Bolts
4.
Install the five rubber feet to the bottom of the chassis.
Figure 4-12 Install Rubber Feet
5.
Position the chassis on top of the CHS BASE UNIT.
UNIVERGE SV8100/SV8300
Installing the SV8100 Chassis