Dcl-60-1( ) (Bk) Console/Dcl-60-1( ) (Wh) Console; Figure 7-66 Dcl-60-1 Console - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
7 - 54
5.2.4

DCL-60-1( ) (BK) CONSOLE/DCL-60-1( ) (WH) CONSOLE

The Attendant Console has 60 programmable line keys and is
available in black or white. The unit features:
60 programmable Direct Station Selection (DSS) keys (Refer to
system user guides).
Supported on ITL or DTL modular terminals
Green and Red LEDs
The DSS Console gives a multiline terminal user a Busy Lamp Field
(BLF) and one-button access to extensions, trunks and system
features. The 60-Button DSS Console provides an additional 60
programmable keys. There are also two keys that allow "shifting"
between the first and second set of 100 extensions.
Keep the following in mind when installing DSS Consoles:
A 60-Button DSS Console requires a separate digital station port
when pairing with a digital multiline terminal. For IP terminals, the
console is connected to the side option slot using a special cable.
5.2.4.1 Installing the DCL-60-1 CONSOLE
1.
2.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Figure 7-66 DCL-60-1 CONSOLE

To prevent possible damage to the DCL-
60-1 CONSOLE or the DTL/ITL
multiline terminal during installation or
removal, disconnect the line cord/LAN
cable and the AC/DC adapter from the
DTL/ITL multiline terminal.
Remove both plastic panels from the front of the
multiline terminal.
Turn multiline terminal upside down.
Only one DCL-60-1 CONSOLE can be attached to the DTL/
ITL multiline terminal at a time.
UNIVERGE SV8100/SV8300