Installing Line Key Kit (12Lk-L Kit); Installing The 12Lk-L Kit; Figure 7-21 12Lk-L( ) Kit; Figure 7-22 Removing The Line Key Panel - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
4.5
System Hardware Manual
Installing Line Key Kit (12LK-L KIT
The 12LK-L KIT Provides 12 additional buttons to ITL or DTL multiline
terminals. The 12LK-L KIT kit:
Mounts directly to top side of terminal
Supports Red and Green LED colors
4.5.1

Installing the 12LK-L KIT

1. Turn multiline terminal upside down.
Only one 12LK-L KIT can be attached to the DTL/ITL multiline terminal.
2. Pry the right side panel from the multiline terminal.
3. From the lower left or right corner, pry the Line Key Panel from
the multiline terminal (refer to
Key Panel on page
)

Figure 7-21 12LK-L( ) Kit

To prevent possible damage to the 12LK-L KIT or
the DTL/ITL multiline terminal during installation
or removal, disconnect the line cord/LAN cable
and the AC/DC adapter from the DTL/ITL
multiline terminal.
7-25).

Figure 7-22 Removing the Line Key Panel

Issue No. 1.5
Figure 7-22 Removing the Line
Line Key
Panel
7 - 25