Figure 7-61 Remove Side Panel From Multiline Terminal - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
5.2.3.1 Installing the 8LKI (LD)-L UNIT
1. Turn multiline terminal upside down.
Only one 8LKI (LD)-L UNIT can be attached to the ITL
multiline terminal.
2. Pry the side panel from the multiline terminal.
Side Panel

Figure 7-61 Remove Side Panel from Multiline Terminal

3. Remove the screw (refer to
Side Panel from Multiline Terminal on page
4. Carefully, return the multiline terminal to the buttons
side up position.
5. Remove the Softkeys and Line Key kit from the
telephone.
To prevent possible damage to the 8LKI
(LD)-L UNIT or the ITL multiline
terminal during installation or removal,
disconnect the line cord/LAN cable and
the AC/DC adapter from the ITL
multiline terminal.
Figure 7-61 Remove
Issue No. 1.5
Screw
7-51).
7 - 51