Pz-8Dlcb (Digital Station Daughter Board); Description; Installation; Pz-8Dlcb Daughter Board Cable Connection - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
4.2
6 - 46

PZ-8DLCB (Digital Station Daughter Board)

4.2.1

Description

The PZ-8DLCB daughter board is common to both UNIVERGE
SV8100/SV8300 systems.
The PZ-8DLCB daughter board provides eight digital extensions. This
daughter board is installed on the CD-8DLCA and expands the port
capacity for the combined blades to 16.
Refer to the following table for maximum upgrade capacity of the
PZ-8DLCB
blades:
Table 2-4 SV8100 Maximum System Capacities – Blades on
page 2-7
4.2.2

Installation

The PZ-8DLCB is installed on the CD-8DLCA. To install:
1. Connect the PZ-8DLCB to the CN2 connector on the CD-8DLCA
blade. Refer to
the location of the connectors on the blade.
2. Install the CD-8DLCA into a slot.
3. Each CNx01 connector (CN101, CN201, CN301, CN401) is
used to connect up to four digital extensions.
4.2.3

PZ-8DLCB Daughter Board Cable Connection

The PZ-8DLCB blade has connections for CN301 and CN401 Refer
to Figure 6-14 CD-16DLCA Blade

Figure 6-15 PZ-8DLCB Blade

Figure 6-13 CD-8DLCA Blade on page 6-42
for connector locations.
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
for