Figure 10-39 Recorder Screen - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
10 - 46
16. Automatically Erase Calls – this can be set to
delete calls after x number of days or after a defined
disk space has been used.
Calls marked Important during playback are not
automatically deleted.
17. Press OK to save the settings.
18. Repeat this procedure for each listed device, entering
a name and identifying the folder for storing recorded
calls.
Calls should be stored on the same PC. However, if a
network drive is used, you should choose a folder location
on the local PC to buffer calls. This allows the application
to run and store calls even if the network is temporarily
down.
19. When all the devices are named and mapped to a
storage folder location, select File then Exit from the
Recorder screen menu to save your configuration.
The NEC Recorder now records every call to and
from the telephones. It is important to use proper
procedure to shut down the application and PC when
necessary.
The Recorder PC should be be left on at all times (with
battery backup) and the application always running.

Figure 10-39 Recorder Screen

Installing SV8100/SV8300 Optional Equipment
UNIVERGE SV8100/SV8300