Figure 5-27 Attach Rubber Feet To Chs2U-Us Chassis; Figure 5-28 Assemble Stand Mount With Screws (Chs1U-Au+Chs2U-Aux2 Configuration) - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
2. Mark and drill the two holes required for a floor installation.
3. Install the five rubber feet to the bottom of each chassis.

Figure 5-27 Attach Rubber Feet to CHS2U-US Chassis

4. Align CHS1U-AU chassis and CHS2U-AU chassis. Secure the
chassis together with a joint bracket on top sides of the chassis.
5. Using supplied screws, assemble the CHS STAND KIT (K) and
CHS2U STAND KIT (EXT). Refer to
Stand Mount with Screws on page
3.3.2.1 CHS1U-AU+CHS2U-AUx2 Stand Mount Assembly
Using supplied screws, assemble the CHS STAND KIT (K)
and CHS2U STAND KIT (EXT). Refer to
Assemble Stand Mount with Screws
(CHS1U-AU+CHS2U-AUx2 Configuration) on page 5-26
for screw location.
Issue No. 1.5
Figure 5-23 Assemble
5-22.
Figure 5-28
5 - 25