Led Indications; Connectors; Figure 6-23 Cd-2Bria Blade; Table 6-32 Cd-2Bria Led Indications - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (80ms
On/Off) x 3/
400ms Off
System Hardware Manual
5.3.3

LED Indications

LED indications for the CD-2BRIA are listed in
LED Indications. Each LED is listed with its associated function and
LED and Operational status. Refer to
on page 6-67

Table 6-32 CD-2BRIA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
5.3.4

Connectors

Table 6-33 CD-2BRIA RJ-61 Cable Connector Pin-Outs

outs for the RJ-45 cable connector for S-Bus and T-Bus connections.
Figure 6-23 CD-2BRIA Blade on page 6-67
connectors on the CD-2BRIA blade.
Table 6-33 CD-2BRIA RJ-61 Cable Connector Pin-Outs
for the location of the LEDs on the blade.
RJ-61 Cable Connector – CN2
Pin No.
1
2
3
4
5
6
7
8
Issue No. 1.5
Table 6-32 CD-2BRIA

Figure 6-23 CD-2BRIA Blade

Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
show the pin-
shows the location of the
Connection
—
—
RA
TA
TB
RB
—
—
6 - 69