Ada-L( ) Unit Connection; Figure 10-52 Ada-L( ) Out Jack Connection - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
8. Return tilt leg to original position.
9. Reconnect all cables previously disconnected.
12.3.3

ADA-L( ) Unit Connection

12.3.3.1 ADA-L( ) Unit Connection for Recording Only
1.
2.
12.3.3.2 ADA-L( ) Unit Connection for Sending Recorded Calls to
the Telephone
1.
The mini-plug connection cord should not use an
attenuator and have a monaural (single ring)
mini-plug connection for normal recording.
Set the ADA-L( ) Unit DSW switches (Refer to
10-48 ADA-L( ) Unit on page
DSW 5 is used to change the
output level from OUT jack of
the ADA-L( ) Unit.
(On = Low, Off = High).
Using the mini-plug connection cord, connect the the
ADA-L( ) Unit Out jack to the cassette recorder MIC
jack (Refer to Figure 10-52 ADA-L( ) OUT Jack
Connection).
03.5 stereo mini-plug ↔ 03.5 stereo mini-plug

Figure 10-52 ADA-L( ) OUT Jack Connection

Set the ADA-L( ) Unit DSW switches (see
10-48 ADA-L( ) Unit on page
Set DSW 6 to ON.
When sending recorded calls
to the telephone, set DSW
switch 1 to ON.
Issue No. 1.5
Figure
10-60).
Figure
10-60).
10 - 63