UNIVERGE SV8100/SV8300
3.2
System Hardware Manual
Floor Mounting the 19" Chassis
The CHS2U-AU controlling and expansion chassis can be mounted on the floor
using the CHS BASE UNIT and the CHS2U JOINT BRACKET KIT.
3.2.1
CHS2U-AU Chassis Installation
1.
Use the template shown in
Guide
anchor bolts (locally procured).
2.
Mark and drill the four holes required to install the CHS BASE
UNIT.
Figure 4-10 Floor Mount Spacing
for required spacing before drilling holes for 0.39" (10mm)
Figure 4-10 Floor Mount Spacing Guide
Issue No. 1.5
4 - 13