Issue No. 1.5
4.6
7 - 30
8.
Press the Up/Down key to select the Line Key kit being used.
By default, the correct line key kit for the keypad kit selected above will be
highlighted.
Line Key Kit Entry
Kit12
Kit24
Kit32
Kit8
Kit6
Kit2
Kit0
9.
Press Softkey 4 for OK to complete.
10.
Continue pressing Softkey 4 to exit (Exit-Exit-Save). The
terminal will reset automatically.
Installing the Directory Card on the Multiline Terminal
A directory card can be attached to DT300/DT700 Series multiline terminals.
The directory card can be used to record often dialed numbers or other
important information.
1.
After recording the information on the lined insert, reinsert it between the
plastic panels of the directory card. Attach the directory card to the
directory card holder as illustrated in
to Directory Card
card holder.
Directory Card
Figure 7-28 Attaching Directory Card to Directory Card Holder
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Table 7-8 Line Key Kit Type
Description
Enhanced 12-Button
Enhanced 24-Button
Enhanced 32-Button
DESI-Less
Value 6-Button
Value 2-Button
IP-CTS
Figure 7-28 Attaching Directory Card
Holder. Note that the open end slides into the directory
UNIVERGE SV8100/SV8300
Directory Card
Holder