Removing Or Installing The Tilt Legs On The Multiline Terminal; Remove Tilt Legs; Figure 7-37 Separating The Tilt Legs; Figure 7-38 Removing Tilt Legs From Multiline Terminal - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
4.9
System Hardware Manual

Removing or Installing the Tilt Legs on the Multiline Terminal

The Tilt Legs can be removed or installed on the DT300/DT700 Series multiline
terminal.
4.9.1

Remove Tilt Legs

1. Place the telephone on a flat surface (button side down).
2. Separate the Tilt Legs and place them flat against the telephone.
Refer to
3. Push downward (two arrows) and slide downward (refer to
Figure 7-38 Removing Tilt Legs from Multiline
4. Lift and remove the Tilt Legs.
Figure 7-37 Separating the Tilt

Figure 7-37 Separating the Tilt Legs

Figure 7-38 Removing Tilt Legs from Multiline Terminal

Issue No. 1.5
Legs.
Terminal).
7 - 37