Figure 11-14 Connecting The Line Cord And Ac Adapter When Installing A Dcr Attendant Console; Figure 11-15 Attendant Console And Multiline Terminal - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
3.
4.
11 - 10
Connect the line cord and the AC adapter to the indicated locations on the bottom
of the Attendant Console.
Figure 11-14 Connecting the Line Cord and AC Adapter when Installing a DCR
When the Attendant Console and the multiline terminal are properly connected,
they sit side-by-side as shown in
Terminal.
Use only the AC adapter, provided with the Attendant Console. Using a different AC
adapter may cause problems. Check that the supplied voltage matches that specified for the
adapter and plug it in an outlet.

Figure 11-15 Attendant Console and Multiline Terminal

UNIVERGE SV8100/SV8300
Attendant Console
Figure 11-15 Attendant Console and Multiline
Installing D
Line Cord Jack
AC Adapter Plug
term
Series i Telephones