Wall Mounting The Multiline Terminal; Wall Mounting A Multiline Terminal Using The Base Plate; Figure 7-41 Adjust Height Of Dt300/Dt700 Series Terminal; Figure 7-42 Removing The Hanger Hook On A Dt300/Dt700 Series Terminal - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
4.10
System Hardware Manual
5. Snap legs together and adjust to desired height. Refer
7-41 Adjust Height of DT300/DT700 Series

Figure 7-41 Adjust Height of DT300/DT700 Series Terminal

Wall Mounting the Multiline Terminal

You can wall mount a DT300/DT700 Series connection multiline terminal using
the base cover or an optional wall mount unit. A wall mount unit must be used if
adapters are installed on the multiline terminal.
4.10.1

Wall Mounting a Multiline Terminal using the Base Plate

4.10.1.1 Adjusting the Hanger Hook
1.
2.
Remove the hook from the unit.
Hanger Hook
Figure 7-42 Removing the Hanger Hook on a DT300/
DT700 Series Terminal
Turn the hook with the tab toward the top.
Issue No. 1.5
Figure
Terminal.
7 - 39