Rack Mounting The 19" Chassis; Figure 5-33 Chs1U-Au+Chs2U-Aux3 Chassis Configuration - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
3.4
5 - 30

Figure 5-33 CHS1U-AU+CHS2U-AUx3 Chassis Configuration

9. Connect the ground wire to all chassis. Refer to
Chassis Grounding on page 5-45
grounding the system.
10. Refer to
installation of the chassis or, Chapter 5 paragraph 2.3 Installing
an Extension or Trunk Blade on page 6-5 for installation of
blades.

Rack Mounting the 19" Chassis

A single or multiple chassis can be rack mounted. Controlling and Expansion
chassis can be racked mounted by stacking them vertically.
1. The 19" chassis requires two rack mount brackets per chassis for
mounting. Each 19" chassis requires its own set of rack mount bracket(s).
Refer to Figure 5-34 19" Rack Mount
Stacking additional chassis (without rack mount
brackets) on top of one rack mounted chassis is not
recommended.
3.5 Installing the 19" Chassis on page 5-33
Brackets.
UNIVERGE SV8100/SV8300
3.5.7 Install 19"
for complete details on
to continue
Installing the SV8300 Chassis