Issue No. 1.5
12 - 16
2.
Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked C.
Refer to
Figure 12-21 Attaching the CT(A)-R( ) Unit to the
Terminal on page
Figure 12-21 Attaching the
3.
Replace the base plate (or wall mount unit) and attach the line
cord. Refer to
Section 3 Connecting a Multiline Terminal to the
System on page
UNIVERGE SV8100/SV8300
12-16.
CT(A)-R( ) Unit
11-8.
term
Installing D
Series i Optional Equipment
to the Terminal