Connectors; Table 6-23 Cd-4Lca/Cd-8Lca Led Indications; Table 6-24 Cd-4Lca/Cd-8Lca Rj-61 Cable Connector Pin-Outs - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (80ms
On/Off) x 3/
400ms Off
System Hardware Manual
LED indications for the CD-4LCA
CD-4LCA/CD-8LCA LED
associated function and LED and Operational status. Refer to
6-16 CD-4LCA Blade on page 6-48
on page 6-49

Table 6-23 CD-4LCA/CD-8LCA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
4.3.3

Connectors

Table 6-24 CD-4LCA/CD-8LCA RJ-61 Cable Connector Pin-Outs

show the pin-outs for the RJ-61 connector.
Blade on page 6-48
show the location of the connectors and the pin number locations on
the CD-4LCA
Table 6-24 CD-4LCA/CD-8LCA RJ-61 Cable Connector Pin-Outs
CD-8LCA – CN2 (ports 1~4), CN3 (ports 5~8)
CD-8LCA are listed in
/
Indications. Each LED is listed with its
for the location of the LEDs on the blades.
and Figure 6-17 CD-8LCA Blade on page 6-49
/
CD-8LCA blades
RJ-61 Cable Connector
CD-4LCA – CN2 (ports 1~4)
Pin No.
1
2
3
4
5
6
7
8
Issue No. 1.5
Table 6-23
and Figure 6-17 CD-8LCA Blade
Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
Figure 6-16 CD-4LCA
Connection
T4 (Tip for port 4)
T3 (Tip for port 3)
T2 (Tip for port 2)
R1 (Ring for port 1)
T1 (Tip for port 1)
R2 (Ring for port 2
R3 (Ring for port 3)
R4 (Ring for port 4)
Figure
6 - 51