Issue No. 1.5
8 - 16
5.
Insert the lower claws of the Bottom Unit (see
Installing the BHA-L
terminal.
6.
Align connector on inside of BHA-L UNIT and push down until
unit snaps into place.
7.
Set tilt legs to desired position.
8.
Return the multiline terminal to the numbered keypad in the up
position.
9.
Connect the Line cord and the AC adapter.
3.1.2
Pairing a Bluetooth Device and Multiline Terminal (Bluetooth Installed)
Access the Bluetooth screen from a multiline terminal menu and
register the Bluetooth headset with the BHA-L UNIT.
3.1.2.1 Accessing the Bluetooth Device Setup Screen
From the multiline terminal, access the setup screen using
one of the following:
3.1.2.2 Entering a PIN Code
In pairing a Bluetooth device having a PIN Code other than
0000, enter a string of four to 16 digits to suit that device.
Figure 8-23 Entering a PIN Code
UNIT) into precut holes on the multiline
Figure 8-22 Installing the BHA-L UNIT
If the BHA-L UNIT is connected to an Aspire X:
Press menu keys > [5. Optional Devices] > [1. Bluetooth].
If the BHA-L UNIT is connected to a PBX (other than Aspire
X):
Press menu keys > [3. Setup] > [5. Optional Devices] >
[1. Bluetooth].
Installing SV8100/SV8300 Cordless Telephones
UNIVERGE SV8100/SV8300
Figure 8-22