Issue No. 1.5
5 - 34
3.5.3
Installing the 19" Controlling Chassis
1.
Ensure the chassis is powered down.
2.
Align the CC-CP00 blade with the slot guide of the Controlling
Chassis.
Figure 5-38 19" CHS1U-AU Controlling Chassis
3.
Slide the CC-CP00 blade into the chassis until resistance (back
plane) is felt.
4.
Gently push until the blade seats. Tighten the two retaining
screws on front of the blade.
Do not remove or install this blade with the
power on.
UNIVERGE SV8100/SV8300
Installing the SV8300 Chassis