Configuring The Ip Telephone For The Correct Number Of Line Keys; Table 7-7 Keypad Kit Type - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
4. Save to memory by pressing line key 2, 8, 14 or 20. The display
changes back to the Service Class R/W mode and the Message
Waiting (MW) LED will be lit Red.
5. Press Exit to return the telephone to the idle condition.
4.5.3

Configuring the IP Telephone for the Correct Number of Line Keys

1. Press HOLD CONF
2. At the Login screen, enter the user name (default = ADMIN) and
password (default = 6633222) and press the OK Softkey.
3. Press Softkey 3 for Maintenance Setting.
4. Press Softkey 4 for Adjust.
5. Press Softkey 2 for Key Kit Type.
6. Press the Up/Down key to select the keypad kit being used.
Keypad Kit Entry
Kit1
Kit2
Kit3
Kit4
Kit8
Kit9
Kit10
Kit11
Kit12
7. Press Softkey 4 for Next.
to enter the terminal program mode.
#

Table 7-7 Keypad Kit Type

Description
Type A – Japan with cursor key
Type A – US with cursor key
Type B – US with cursor key
32 Line Key without cursor key
Type A – Japan without cursor key
Type A – US without cursor key
Type B – US without cursor key
Issue No. 1.5
7 - 29