Issue No. 1.5
I
S
8
NSTALLING A
ECTION
The BS( )-R( ) Unit button set can be installed on a multiline terminal to accommodate
French and Spanish languages. The keypad provides the appropriate language
designations.
1.
2.
3.
4.
A
S
9
DJUSTING THE
ECTION
The base plate on the multiline terminal is hinged to allow the height of the terminal to
be raised or lowered.
11 - 14
B
UTTON
Remove the plastic cover. (Refer to paragraph
page
11-12.)
Pull up on the tab and lift the button pad away from the telephone to remove the
existing button.
Figure 11-22 Removing the Button Set from a Multiline Terminal
Slide the new button set into the grooves located on the inside of the telephone,
then press down on the button set to snap it into place.
Figure 11-23 Inserting a New Button Set into a Multiline Terminal
Insert the line card and plastic panel on the multiline terminal.
H
EIGHT ON A
S
M
ET ON A
ULTILINE
M
ULTILINE
Installing D
UNIVERGE SV8100/SV8300
T
ERMINAL
6.2 Removing the Plastic Panel on
T
ERMINAL
term
Series i Telephones