Issue No. 1.5
5 - 70
2.
Remove two screws from front of Battery Tray Suppressor.
Refer to
Figure 5-101 Removing Battery Tray
Figure 5-101 Removing Battery Tray Suppressor
3.
Slide Battery Tray Suppressor outward to remove.
4.
Disconnect the Battery Connection Cables from the Fuse Unit.
Refer to
Figure 5-102 Disconnecting Battery Cables on page
5-70.
Figure 5-102 Disconnecting Battery Cables
5.
Loosen two screws and pull Fuse Unit out of the CHS LARGE
BATT BOX.
6.
See
Figure 5-103 CHS LARGE BATT BOX Fuse Unit on page
5-71
for replacement of 8A or 30A fuses.
UNIVERGE SV8100/SV8300
Suppressor.
Installing the SV8300 Chassis