UNIVERGE SV8100/SV8300
System Hardware Manual
The connector plate cannot be used with InMail terminals.
6.
Replace the base units as shown in
Multiline Terminal with Base Covers
4.2.2
Wall Mounting ADM and Multiline Terminal
1.
Remove both base units.
2.
Remove the multiline terminal base Unit cutout shown in
12-33 Installing Base Units on the Wall on page
3.
Install the base units on the wall using the eight screws.
Figure 12-32 Installing the Connector Plate
Issue No. 1.5
Figure 12-31 ADM and
Removed.
Figure
12-26.
12 - 25