Figure 10-62 Remove Legs From Multiline Terminal; Figure 10-63 Bottom Of Multiline Terminal (Legs Removed) - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
10 - 70
6. Press the two tabs locking the legs to the multiline terminal and
pull the legs toward you, lifting to remove.

Figure 10-62 Remove Legs From Multiline Terminal

7. Disconnect serial connection cord from terminal body. Leave
cord connected to the cradle unit.
8. Push latch to right to unlock the cradle unit. Then push the
cradle unit forward to separate from the terminal body.

Figure 10-63 Bottom of Multiline Terminal (Legs Removed)

UNIVERGE SV8100/SV8300
Installing SV8100/SV8300 Optional Equipment
Latch